| Status [component] |
text |
Read-only field. Indicates the condition of the component at last polling.
- {ok} indicates that the component is licensed and polling successfully.
- {down} indicates that polling is unsuccessful, perhaps because of an incorrect property.
- {disabled} indicates that the
Enable property is set to false.
- {fault} indicates another problem.
|
| Enabled [general] |
true or false |
Activates and deactivates use of the component. |
| Fault Cause |
text |
Read-only field. If the network, component, or extension is in fault, indicates the reason. This field is empty unless a fault
exists.
|
| Health |
text |
Health contains historical properties about the relative health of the device in the station, including historical timestamps.
See Knx Device/Health.
|
| Alarm Source Info |
Alarm Source Info |
Alarm Source Info contains a set of properties for configuring and routing alarms and are used to populate an alarm if the
device does not respond to a monitor ping. See Knx Device/Alarm Source Info.
|
| Config Status |
string |
Displays the status of the configuration (read only). |
| Device Id |
1, 2, ... max |
Displays Device Id (read only) |
| IP Address |
nnnn.nnnn.nnnn.nnnn |
The IP Address of the device. |
| Control Port Number |
–1, 1, 2, ... 65535 |
The Control Port Number of the device. |
| Individual Device Address |
nnn.nnn.nnn |
Individual Device Address |
| Mac Address |
string |
Displays the Mac Address of the KNXnet/IP Interface device (read only). |
| Device Friendly Name |
string |
Displays the Friendly Name of the KNXnet/IP Interface device (read only). |
| DIBs |
Description Information Blocks |
Holds information on the Device. See Knx Device/DIBs.
|
| Group Data Manager |
Group Data Manager |
Holds information and configuration for the Group Data Manager. See Knx Device/Group Data Manager.
|
| Points |
Knx Point Device Ext |
Holds information and configuration for the KNX proxy points. See Knx Proxy Ext.
|
| Connection Method |
Tunnelling (default) or Proxy Routing |
The Connection Method. |
| Comms Connections |
Connections |
Holds information and configuration of the Comms connections. See Knx Device/Comms Connections.
|